Verification; Verification Overview; Start Hp Netserver Navigator - HP D5970A - NetServer - LCII Installation Manual

Processor upgrade installation guide

Hide thumbs Also See for D5970A - NetServer - LCII:

Table of Contents

5 Verification

HP DiagTools is the offline diagnostic program that you will use to verify the

processor upgrade. You will run it from a flexible diskette that you will make

from the HP NetServer Navigator CD-ROM.

To verify the upgrade, do the following:

Start HP NetServer Navigator, and go to the NetServer Utilities menu.

Use HP NetServer Navigator to create an HP DiagTools flexible diskette.

Run HP DiagTools from the flexible diskette to verify the upgrade.

Reinstall the NOS, if necessary.

Verify the NetServer date and time.

NOTE

Download the HP NetServer DiagTools Error Reference and

User Guide from the following web site:

http://www.hp.com/go/netserver/servsup/

trouble/

Start HP NetServer Navigator, and go to the NetServer Utilities menu, as follows:

1. Turn on power to the display monitor and the NetServer.

The HP NetServer Navigator CD-ROM should still be in the drive. If not,

insert the HP NetServer Navigator CD-ROM into the drive, turn the

power off, wait 10 seconds, and turn the power on again.

Table of Contents