Chapter 3 Opening And Closing The Hp Netserver Lpr; Removing And Replacing The Front Bezel - HP D5970A - NetServer - LCII Installation Manual

Chapter 3 Opening and Closing the
HP NetServer LPr

Removing and Replacing the Front Bezel

Remove or replace the NetServer LPr front bezel by snapping it on or off at the
points indicated in Figures 3-1 and 3-2. Use the slots on the side of the bezel to
grasp it.
For details on removing the sever chassis from the rack, see the end of Chapter 9.
Figure 3-1. Removing the HP NetServer LPr's Front Bezel
17