Software Installation - HP D5970A - NetServer - LCII Installation And User Manual

Chapter 2

Software Installation

Use this procedure to install the FCArray Assistant software on both the managed
Server and the remote Client management workstation.
1. Insert the FCArray Assistant Installation Diskette #1 in drive A:
2. Select Start from the menu, followed by Run at the Desktop.
The Run dialog box appears. See Figure 2-1.
Figure 2-1. Starting the Installation Program
3. Enter the complete pathname of the SETUP.EXE file and press Enter.
A:\Setup.exe
After FCArray Assistant Setup prepares the Install Shield
Welcome dialog box appears. See Figure 2-2.
4. Click Next to proceed with the installation, or click Cancel to end the
installation procedure and return to Windows NT.
FCArray Assistant Software Information
®
Wizard, the
9