Installing A Security U-Bolt - Lenovo NetVista A40p User Manual

6. Connect the power and signal cables to the drive.

Installing a security U-bolt

To help prevent hardware theft, you can add a security U-bolt and cable to your
computer. After you add the security cable, make sure that it does not interfere
with other cables that are connected to the computer.
To install a U-bolt:
1. Remove the cover (see "Removing the cover" on page 35 ).
2. Use a tool, such as a screwdriver, to remove the two metal knockouts.
3. Insert the U-bolt through the rear panel; then attach and tighten the nuts with
4. Replace the computer cover. For more information, see "Replacing the cover
50
User Guide
What to do next
v To work with another option, go to the appropriate section.
v To complete the installation, go to "Replacing the cover and connecting the
cables" on page 51.
an appropriately sized or adjustable wrench.
and connecting the cables" on page 51.