Installing Memory - Lenovo NetVista A40p User Manual

See the following illustration for the location of parts on the system board.
Note: An illustration of the system board and additional information is provided
on a label located on the inside of the computer chassis.
1 CPU fan connector
2 Microprocessor and fan sink
3 DIMM 1 or RIMM 1
4 DIMM 2 or RIMM 2
5 Power LED connector
6 RFID connector
7 Front USB connector
8 Secondary IDE connector
9 Diskette connector
10 Primary IDE connector
11 Power connector
12 CMOS clear/recovery jumper
13 Front fan connector

Installing memory

Your computer has two connectors for installing memory modules that provide up
to a maximum of 512 MB of system memory.
Your computer uses either dual inline memory modules (DIMMs) or Rambus
inline memory modules (RIMMs), depending on the model. To tell which type of
memory your computer uses, use the Configuration/Setup Utility program to view
system information.
14 Battery
15 SCSI adapter LED connector
16 Alert on LAN connector
17 Wake on LAN connector
18 Bus extender
19 PCI slot
20 PCI slot
21 PCI slot
22 PCI slot
23 PCI slot
24 AGP slot
25 CD-ROM audio connector
26 Speaker connector
Chapter 4. Installing internal options — minitower model
37