Installing Security Features; Integrated Cable Lock - Lenovo ThinkCentre 3029 User Manual

Hide thumbs Also See for ThinkCentre 3029:
Table of Contents

Advertisement

Figure 36. Reinstalling the computer cover
5. If the computer cover is secured with thumbscrews, install them.
6. If there is a padlock available, lock the computer cover. See "Padlock" on page 40.
7. If there is an integrated cable lock available, lock the computer.
8. Reconnect the external cables and power cords to the computer. See "Locating connectors on the rear
of your computer" on page 7.
9. To update your configuration, refer to Chapter 4 "Using the Setup Utility program" on page 49.
Note: In most areas of the world, Lenovo requires the return of the defective Customer Replaceable Unit
(CRU). Information about this will come with the CRU or will come a few days after the CRU arrives.
Obtaining device drivers
You can obtain device drivers for operating systems that are not preinstalled at
http://www.lenovo.com/support. Installation instructions are provided in readme files with the device-driver
files.

Installing security features

There are several security options available to help you prevent hardware theft and unauthorized access to
your computer. In addition to physical locks, you can also prevent unauthorized use of your computer by a
software lock that locks the keyboard until a correct password is typed in.
Note: Make sure that any security cables you installed do not interfere with other computer cables.

Integrated cable lock

An integrated cable lock, sometimes referred to as the Kensington lock, can be used to secure your
computer to a desk, table, or other non-permanent fixture. The cable lock attaches to the integrated cable
.
Chapter 2
Installing or replacing hardware
39

Advertisement

Table of Contents
loading

Table of Contents