Replacing The Service Door - HP ProBook 4445s User Manual

To remove the service door:
1. Remove the battery (see
2. With the battery bay toward you, remove the security screw (1), if in use (see
security screw on page
3. Slide the service door release latches (2) to release the service door.
NOTE:
one at a time.
4. Slide the service door towards the front of the computer (3) and lift (4) to remove the service
door.

Replacing the service door

Replace the service door after accessing the memory module slot, hard drive, regulatory label, and
other components.
To replace the service door:
1. Tilt the service door down to align the tabs on the service door with the latches on the computer
(1), then slide the door in to close it (2).
NOTE:
46 Chapter 7 Drives
Inserting or removing the battery on page
44).
You can slide the service door release latches simultaneously or you can slide them
The release latches automatically lock the service door into place (3).
37).
Using the optional