Installing A Hard Drive - HP ProBook 4445s User Manual

Installing a hard drive

1. Insert the hard drive into the hard drive bay.
2. Pull the plastic tab on the hard drive (1) towards the center of the computer to engage the hard
drive with the connector.
3. Replace the four hard drive screws (2).
4. Replace the service door (see
5. Replace the security screw, if desired (see
6. Replace the battery (see
7. Turn the computer right-side up, and then reconnect AC power and external devices to the
computer.
8. Turn on the computer.
Removing or replacing the service door on page
Using the optional security screw on page
Inserting or removing the battery on page 37).
Replacing or upgrading the hard drive
45).
44.
49