Removing Or Replacing The Service Door; Removing The Service Door; Replacing The Service Door - HP EliteBook 8770w Getting Started Manual

Removing or replacing the service door

CAUTION:
Save your work and shut down the computer before adding or replacing a memory module or hard
drive.
If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the
power button. Then shut down the computer through the operating system.

Removing the service door

Remove the service door to access the memory module slot, hard drive, regulatory label, and other
components.
To remove the service door:
1. Remove the battery (see
2. With the battery bay toward you, slide the service door release latch (1) to the left, remove the
screw (if the optional screw is being used) (2), and then slide the release latch again (3) to
release the service door.
3. Slide the service door towards the front of the computer (4) and lift (5) to remove the service
door.

Replacing the service door

Replace the service door after accessing the memory module slot, hard drive, regulatory label, and
other components.
32 Chapter 5 Maintenance
To prevent information loss or an unresponsive system:
Inserting or removing the battery on page 30).