Toner Sensor Removal; Transfer Roll Assembly Removal - Lexmark T632 Service Manual

Toner sensor removal

1.
Remove the right side cover. See
2.
Remove the toner sensor mounting screw (A).
3.
Disconnect the toner sensor cable and remove the toner sensor.

Transfer roll assembly removal

1.
Open the upper front cover and remove the print cartridge.
2.
Unsnap the transfer roll assembly from the left pivot arm.
3.
Lift the transfer roll assembly toward the left and remove it from the printer.
"Right cover removal" on page
A(102)
4060-xxx
4-10.
4-61
Repair information