Toner Level Sensor Removal - Lexmark X46x series Service Manual
Hide thumbs
Also See for X46x series:
- User manual (321 pages) ,
- Service manual (304 pages) ,
- Administrator's manual (79 pages)
Table of Contents
Advertisement
7014-xxx
Toner level sensor removal
1.
Open the front access door.
2.
Remove the right side cover. See
3.
Disconnect the toner level sensor cable (A) from the engine board.
4.
Squeeze the lower tabs (B) of the toner level sensor, and push it from its holder.
5.
Remove the toner level sensor through the inside of the printer.
Note: The toner level sensor must be installed properly, or the printer will not function.
4-82
"Right side cover removal" on page
B
4-80.
A
Advertisement
Table of Contents
