Configuring System Bios - HP Z210 Maintenance And Service Manual
Convertible mini tower workstation
Hide thumbs
Also See for Z210:
- User manual (68 pages) ,
- Support manual (22 pages) ,
- Installation manual (19 pages)
Table of Contents
Advertisement
Configuring system BIOS
Configure the system BIOS to enable embedded SATA RAID functionality.
1.
To enter the system BIOS setup, press F10.
2.
Use the arrow keys to highlight the desired language, and then press Enter.
3.
Use the arrows to highlight Storage>Storage Options, and then press Enter.
4.
Use the up or down arrow key to highlight SATA Emulation.
5.
Use the left or right arrow key to select RAID+AHCI.
6.
To accept the new setting, press F10.
7.
Use the arrows to highlight Advanced>Power-On Options, and then press Enter.
8.
Use the up or down arrow key to highlight POST Messages.
9.
Use the left or right arrow key to select Enable.
10.
To accept the new setting, press F10.
11.
Use the arrow keys to highlight Advanced>Device Options, and then press Enter.
12.
Use the up or down arrow key to highlight SATA RAID Option ROM Download, and then
press Enter.
13.
Use the left or right arrow key to select Enable.
14.
To accept the new setting, press F10.
15.
Use the arrows to highlight File>Save Changes and Exit, and then press Enter.
16.
Press
148
Chapter 7 Configuring RAID devices
F10
when prompted.
ENWW
- Quick Links:
- System Board Architecture
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
