HP Xw460c - ProLiant - Blade Workstation User Manual page 49

NOTE: Selecting "Yes" will cause the hprclipboard.dll library to be installed with the RGS Receiver. If
you select "No", this DLL won't be installed and you won't be able to use Remote Clipboard. To enable Remote
Clipboard later, you would need to reinstall the RGS Receiver, and select "Yes" in the above dialog.
5. The final installation step will normally prompt you to restart your computer.
Automatic installation of the RGS Receiver on Windows
The RGS Receiver can be installed or removed in automatic mode. Automatic mode allows the Receiver to be
installed or removed without any user interaction. Automatic mode will also restart the computer, if required, after
the installation process completes.
Should an illegal combination of command line options be specified, or if an error occurs during the install
process, the install will abort and the error will be logged to the Receiver installation log file.
Usage
Setup.exe /autoinstall /agreetolicense [/folder=<folder>]
Setup.exe /autoremove [/noreboot]
Setup.exe /viewlicense
Setup.exe /help
Command line options
/autoinstall
This option performs one of the following:
Installs the Receiver if it's not already installed.
•
Updates the Receiver if a prior version of the Receiver is already installed.
•
Repairs the Receiver if the version being installed is the same as the version that is already installed.
•
The Receiver will not be reinstalled if the version of the Receiver being installed is older than the version of the
Receiver already installed.
/agreetolicense
Use of this option indicates that the user agrees to the license for use of this software. This option is required when
doing an install.
/autoremove
Remove the Receiver.
/folder=<folder>
Specifies the destination folder, default is C:\Program Files\Hewlett-Packard\Remote Graphics Receiver.
/usb=local
Install USB in Local Mode.
/usb=remote
Install USB in Remote Mode. The system will automatically restart after the install completes.
/usb=localRemote
Install USB in Local/Remote Mode. The system will automatically restart after the install completes. This is the
default if none of /usb=local, /usb=remote, and /usb=localRemote are specified.
/clipboard
Enable remote clipboard.
/noreboot
Do not reboot the system when the setup requires a reboot to complete.
/removesettings
[/usb=local | /usb=remote | /usb=localRemote]
[/clipboard]
[/noreboot]
[/removesettings]
Installing RGS 49