HP Xw460c - ProLiant - Blade Workstation User Manual page 39

Table 2-2 Linux RGS audio data paths
Audio Playback from the Remote Computer
to the Local Computer
1. The application-generated audio output.
2. If an audio device is installed, the application-generated
audio is routed through it. Note that blade workstations do
not contain audio devices—therefore, audio playback is not
supported on blade workstations.
3. The HP Remote Audio virtual device is not supported on Linux.
4. Audio from either the audio device is sent to the RGS Audio
Recorder.
5. The RGS Audio Recorder captures the audio, which is sent by
RGS to the Local Computer.
6. The RGS Audio Player on the Local Computer decodes the
received audio, and sends it to the audio mixer.
7. The output of the audio mixer is sent to the Local Computer
audio device.
8. The audio device drives an audio output device, such as a
speaker.
Sending of microphone audio from the Local
Computer to the Remote Computer
USB devices are Local: Linux does not support
locally-mounted USB microphones.
USB devices are Remote: Beginning at RGS
5.2.0, certain USB microphones can be
mounted to the Remote Computer using the
remote USB driver—see Appendix B for the
supported microphones. See the previous
section for a description of Remote USB
operation.
RGS overview 39