HP Xw460c - ProLiant - Blade Workstation User Manual page 169

RGSENDER_SET_NONPRIMARY
EventID: 7
RGSENDER_ASSIGN_USER
EventID: 8
RGSENDER_CONNECT_USB_DEVICE
EventID: 9
RGSENDER_DISCONNECT_USB_DEVICE
EventID: 10
RGSENDER_CONNECT_USB_DENIED
EventID: 13
A connection with an associated name is assigned to a non-primary
status. This may happen as a result of a logout.
Event Viewer Message:
Set %1 as non-primary connection.
Strings:
%1 = name associated with connection
Data: None
Event Viewer Example:
Set MYDOMAIN\myusername as non-primary
connection.
If Easy Login is enabled, the assignment of the name will be deferred
until login. When the name is assigned, this message will be
generated.
Event Viewer Message:
Assign %1 connection to %2.
Strings:
%1 = original name of connection
%2 = new name of connection
Data: None
Event Viewer Example:
Assign Anonymous connection to
MYDOMAIN\myusername.
A new USB device was connected to the sender via remote USB.
Event Viewer Message:
USB Device Connect: Class=%1, Vendor ID=%2,
Product ID=%3, Manufacturer=%4, Product=%5
Strings:
%1 = USB device class
%2 = USB device vendor ID
%3 = USB device product ID
%4 = USB device manufacturer string
%5 = USB device product string
Data: None
A new USB device was disconnected to the sender via remote USB.
Event Viewer Message:
USB Device Connect: Class=%1, Vendor ID=%2,
Product ID=%3, Manufacturer=%4, Product=%5
Strings:
%1 = USB device class
%2 = USB device vendor ID
%3 = USB device product ID
%4 = USB device manufacturer string
%5 = USB device product string
Data: None
A USB device connection was denied by the USB access control list.
Event Viewer Message:
USB Device Connection Denied: Class=%1, Vendor
ID=%2, Product ID=%3
Strings:
%1 = USB device class
Remote Application Termination 169