HP Visualize J5000 - Workstation Manual page 9

NOTE Remove any accessory bag(s) and their black tab screws, if present, from the
rear of the workstation.
1. Shut down the workstation by executing shutdown -h as root. This ensures that all
programs are terminated and all data is saved before switching the power off.
Power off the workstation by simply pressing the power switch on the front panel of the
workstation. Also, power off the monitor and any attached peripheral devices.
2. After 30 seconds unplug the workstation power cord and all peripheral devices from AC
power outlets. Before attempting to move the workstation to a disassembly area,
disconnect all peripherals from the back of the system.
3. Place the workstation on a flat stable surface, such as a tabletop or floor. To protect
against scratches, remove miscellaneous debris from the work surface.
Chapter 1
Safely Powering Down the J Class Workstation
Getting Started
9