Specifications - HP Vectra XE310 Technical Reference Manual

System Overview

Specifications

Physical Characteristics
Weight (configuration with 1 CD-ROM drive,
excluding keyboard and display)
Dimensions
Footprint
Acoustic noise emission (ISO 7779)
Operating (idle)
Power Supply
Input voltage (voltage selection switch):
Input frequency:
Power consumption (115 / 60Hz and 230 / 50 Hz)
Max
Operating
Suspend
Off
Available minimum output power
Storage Humidity
Operating temperature and humidity ranges may vary depending on the mass storage devices installed. High humidity
NOTE
levels can cause improper operation of disk drives. Low humidity ranges can aggravate static electricity problems and
cause excessive wear of the disk surface.
The power consumption and acoustics figures given in the tables above are valid for the standard configuration as shipped.
For more information, refer to the product's data sheet at HP's web site: www.hp.com/desktops.
When the computer is turned off with the power button on the front panel, the power consumption falls below 10W, but
it is not zero. The special on/off method used by these computers considerably extends the lifetime of the power supply.
To reach zero power consumption in "off" mode, either unplug the power outlet or use a power block with a switch.
Environmental Specifications
Environmental Specifications (System Processing Unit, with Hard Disk)
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
Operating Altitude
Storage Altitude
12 product description
Vectra XE310 Characteristics
10 kilograms (22 pounds)
38.0 cm (Depth) by 21.0 cm (Width) by 39.0 cm (Height)
(14.96 inches by 8.27 inches by 15.35 inches)
2
0.068 m (0.73 sq ft)
Sound pressure level at operator position
LpA 35 dBA
100-127 V 4A, 200-240 V 2A
50/60Hz
Windows XP
62W
40W
5W
5W
149W
8% - 85% (relative)
° ° ° °
+10 C to +35 C (+50 F to 95
-40°F to +70°F (-40°C to +158°C)
15% to 80% (relative)
8% to 85% (relative), non-condensing at 40°C (104°F)
10000ft (3100m) max
15000ft (4600m) max
F)