Network - HP Vectra XE310 Technical Reference Manual

Network

All models have an integrated Intel LAN. It is possible to disable integrated LAN via the BIOS setup.
There is no Wake On LAN (WOL) connector. Support of WOL through PCI 2.2.
If you install a LAN card, integrated LAN is not automatically disabled, you can disable the integrated
LAN controller in the PC's Setup program. For more information, refer to "Using the HP Setup Program"
on page 26.
The Intel LAN boot ROM setup can be launched by pressing CTRL-S while booting your PC.
LAN connector
The 10/100BT connector is located on the rear of the HP XE310 Series 2 PC
10/100BT LAN
connector
There are two LEDs on the 10/100BT connector as indicated in the graphic above. The following table
provides a status summary of these LEDs:
LED
Green
Yellow
For more information on network technology, refer to the Technical Reference Manual - Business PC
Technology.
Description
Flashing
Speed LED N/A
Link Integrity and Link integrity OK and
Activity LED network traffic present
Status
On
100 Base-T connection 10 Base-T connection
between NIC and hub between NIC and hub
Link integrity OK and no No connection
network traffic between NIC and hub
System Features
.
LEDs
Off
product description 23