Setup To Test Ris Feature; Stop/Remove Other Pxe Servers - HP Vectra 486M - MI Setup Manual

4.1. Stop/Remove
Other PXE Servers

4. Setup to Test RIS Feature

RIS uses PXE to start the procedure. Due to this, any other PXE
servers should be stopped.
Users will first need to stop any other PXE services on their RIS
server. If the Intel PXE PDK configuration program has been
run, follow the procedure below to stop these services:
1. Right click on My Computer, then on Manage and then
double-click on Services and Applications, and finally on
Services.
2. Scroll down to find "Intel PXE services" and "Intel MTFTP
services".
3. Right click on "Intel PXE services", then click on
Properties, and then in the Startup type list box, select
Manual. Validate this by clicking on OK.
4. Next, right click on "Intel PXE MTFTP services", click on
Properties, and then in then Startup type list box, select
Manual. Validate this by clicking on OK.
5. Now restart your server.
26