Hard drive
NOTE:
All hard drive spare part kits include a hard drive bracket.
NOTE:
The hard drive cable is included in the Misc Cable Kit, spare part number 608009-001.
Description
500-GB, 7200 RPM
320-GB, 7200 RPM
250-GB, 7200 RPM
160-GB solid-state drive
Hard drive hardware kit (includes screws and hard drive bracket)
Before removing the hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the memory/wireless module compartment cover (see
Remove the hard drive:
1.
Position the computer with the front toward you.
2.
Remove the Phillips PM2.5×5.0 screw (1) that secures the hard drive cover to the computer.
50
Chapter 4 Removal and replacement procedures
Battery on page
40).
Spare part number
608014-001
608013-001
608012-001
608011-001
608015-001
Memory module on page
41)