Power Button Board - HP Presario CQ32-100 - Notebook PC Maintenance And Service Manual

Power button board

Description
Power button board (with cable and bracket)
Before removing the power button board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the following components:
a.
Hard drive (see
b.
Optical drive (see
c.
Top cover (see
d.
Speaker assembly
Remove the power button board:
1. Turn the computer upright with the right side toward you.
2. Disconnect the cable from the system board (1).
3. Remove the Phillips PM2.0×3.0 screw (2) that secures the power button board to the top cover.
70 Chapter 4 Removal and replacement procedures
Battery on page 40).
Hard drive on page 50)
Optical drive on page
Top cover on page 54)
(Speaker assembly on page
Spare part number
608276-001
53)
62).