Chapter 6
32-bit
PCI Slot P1
PCI Slot P2
PCI Slot P3
PCI Slot P4
32-bit
NOTE
Refer to the Tested Products List on the HP web site for
specific slot recommendations for a particular PCI board type.
7. Remove the slot cover latch by:
a. Lift up on the tab of slot cover latch.
b. Raise the slot cover latch up from the slot covers.
c. Remove it from the chassis and keep it for reassembly. See Figure 6-2.
You may need to lift the slot cover latch out of its retainer before lifting it
out of the chassis.
Figure 6-1. Accessory Board Slots
Installing Additional Boards
49