HP Tc2100 - Server - 128 MB RAM Installation Manual page 49

Chapter 5 Installing Additional Memory
3. Remove the left side cover from the Server and lay it aside.
Refer to Chapter 3, "Opening and Closing the HP Server."
4. Lay the Server on its side with the components up.
5. Open the retaining latches.
6. Lift the DIMM completely away from the slot.
7. Place the DIMM in its anti-static container.
8. Repeat Steps 5-7 for as many DIMMs as you need to remove.
9. When you have completed removal and installation of DIMMs as required,
close the Server and restore power.
43