E Thin Client Operation; Routine Thin Client Care - HP T5720 - Compaq Thin Client Hardware Reference Manual

Routine thin client care

Hardware Reference Guide
Thin client operation
Use the following information to properly care for your thin client:
■
Operate the thin client on a sturdy, level surface. Leave a 1-inch
(2.5-cm) clearance around the air vents to permit the required
airflow.
■
Never operate the thin client with the outside panel removed.
■
Never restrict the airflow into the thin client by blocking the vents
or air intake.
■
Keep the thin client away from excessive moisture, direct
sunlight, and extreme heat and cold. For information about the
recommended temperature and humidity ranges for the thin
client, see Appendix A,
■
Keep liquids away from the thin client and keyboard.
■
Turn off the thin client before you do either of the following:
❏
Wipe the exterior of the thin client with a soft, damp cloth as
needed. Using cleaning products may discolor or damage the
finish.
❏
Occasionally clean the air vents of the thin client. Lint and
other foreign matter can block the vents and limit airflow.
www.hp.com
"Specifications".
E
E-1