Appendix D Hp Multiseat Thin Client T100 Operation; Routine Hp Multiseat Thin Client T100 Care; Supported Orientations - HP t100 Hardware Reference Manual

D HP MultiSeat Thin Client t100 Operation

Routine HP MultiSeat Thin Client t100 Care

Use the following information to properly care for the HP MultiSeat Thin Client t100:
●
Never operate the HP MultiSeat Thin Client t100 with the outside panel removed.
●
Keep the HP MultiSeat Thin Client t100 away from excessive moisture, direct sunlight, and extreme
heat and cold. For information about the recommended temperature and humidity ranges for the
HP MultiSeat Thin Client t100, see
●
Keep liquids away from the HP MultiSeat Thin Client t100.
●
Turn off the HP MultiSeat Thin Client t100 and wipe the exterior with a soft, damp cloth as needed.
Using cleaning products may discolor or damage the finish.

Supported Orientations

HP supports the following orientations for the HP MultiSeat Thin Client t100.
CAUTION:
t100 functions properly.
● If the HP MultiSeat Thin Client t100 is not to be mounted, only the horizontal orientation is
supported. Be sure to set the HP MultiSeat Thin Client t100 on its rubber feet.
Figure D-1
●
You can lay the HP MultiSeat Thin Client t100 under a monitor stand with at least one inch of
clearance.
14

Appendix D HP MultiSeat Thin Client t100 Operation

You must adhere to HP-supported orientations to ensure your HP MultiSeat Thin Client
Horizontal orientation
Specifications on page 4.
ENWW