Hardware upgrades
Internal battery
MultiBay hard drive and diskette drive
2-10
1. Complete steps 1 through 4 of the
sequence" on page
2. Locate the battery on the system board.
3. Pull back on the clip 1 that is holding the battery in place, and
then remove the battery 2.
4. Insert the new battery and position the clip back into place.
Removing and replacing the internal battery
5. Complete steps 6 through 10 of the
installation sequence" on page
A MultiBay hard drive and diskette drive are available as options for
the t5720/t5725. These are external USB-compatible drives. For more
installation information about these drives, visit
www.hp.com/products/thinclientsoftware
that accompany the option.
www.hp.com
"General hardware installation
2-1.
"General hardware
2-1.
, or refer to the instructions
Hardware Reference Guide