Removing the cover
To remove the cover:
1. Shut down your operating system, remove any media (diskettes, CDs, or tapes)
2. Unplug all power cords from electrical outlets.
3. Disconnect all cables attached to the computer. This includes power cords,
4. Press the buttons on the sides of the computer and pivot the rear end of the
Important
Read "Safety Information" on page v and "Handling static-sensitive devices"
on page 13 before removing the cover.
from the drives, and turn off all attached devices and the computer.
input/output (I/O) cables, and any other cables that are connected to the
computer.
cover up toward the front of the computer.
Chapter 2. Types 8303, 8304, and 8312
17