Audio Adapter; Adsl Modem; Replacing The Cover - IBM NetVista Hardware Maintenance Manual

Audio adapter

ADSL modem

Depending on how the user's home or office is wired, the ADSL modem uses
either wires 2 and 5 or wires 3 and 4 of the telephone-line wall connector. Refer to
the label on the back of the ADSL modem and set the switch on the back of the
ADSL modem to match the wiring scheme. If you do not know which wiring
scheme to use, contact the user's ADSL service provider.

Replacing the cover

1. Position the cover on the chassis, aligning the tabs on the cover with the slots
2. Slide the cover toward the front bezel of the computer until the cover snaps
3. Replace the two screws and engage the keylock (if any).
38
IBM NetVista Type 6838, 6848: Hardware Maintenance Manual
Connector
1 Digital video interface
(DVI) connector
2 S-Video connector
3 SVGA monitor
converter
4 SVGA monitor
converter
5 Monitor cable
Connector
1 MIDI/joystick connector
2 Audio line-out connector
3 Microphone connector
4 Audio line-in connector
on the chassis.
into place.
Description
Used to attach a digital monitor. This connector provides
the signals necessary to support the Display Power
Management Signaling (DPMS) standard.
Used to attach a television set that has a S-Video connector.
The S-Video cable (required to connect the television set to
the adapter) is a separately purchased item.
Used to attach an analog SVGA monitor to the AGP DVI
connector. This SVGA converter is not used in this machine
type.
Used to attach an analog SVGA monitor to the AGP DVI
connector.
Connects monitor to video output from computer