Replacing The Power Supply - Lenovo K100 Hardware Maintenance Manual

Hardware Maintenance Manual

Replacing the power supply

30
3. To reinstall the bezel, align the plastic tabs on the bottom of the bezel
with the corresponding holes in the chassis, then snap it into position
at the bottom and top of the chassis.
4. Refer to the "Completing the installation".
Attention
Do not remove the computer cover or attempt any repair before
reading the "Safety information" .
To replace the power supply:
1. Remove the computer cover. Refer to "Removing the computer cover".
Note: For this procedure, it helps to lay the computer on its side.
2. Disconnect the power supply cables from the system board and from
all drives.