Selecting Or Changing The Startup Device Sequence; Exiting From The Setup Utility Program - Lenovo K100 Hardware Maintenance Manual

Selecting or changing the startup device sequence

Exiting from the Setup Utility program

3. Select the desired startup device from the Startup Device Menu and
press Enter to begin.
Note: Selecting a startup device from the Startup Device menu does
not permanently change the startup sequence.
To view or permanently change the configured startup device sequence,
do the following:
1. Start the Setup Utility program (see "Starting the Setup Utility program"
on page 16).
2. Select Boot.
3. Select Boot Sequence. See the information displayed on the right side
of the screen.
4. Select the devices for the First Boot Device, the Second Boot Device,
and the Third Boot Device.
5. Select Exit from the Setup Utility menu and then Save changes and
Exit.
If you have changed these settings and want to return to the default
settings, select Load Optimal Defaults on the Exit menu.
When you finish viewing or changing settings, press Esc to return to the
Setup Utility program menu (you might have to press Esc several times).
If you want to save the new settings, select Save changes and Exit before
you exit. Otherwise, your changes will not be saved.
Chapter 5. Using the Setup Utility
21