Panasonic DMCFZ100K Operating Instructions Manual page 59

∫ Extra Optical Zoom mechanism
As an example, if you set to [
(3 million pixels worth) in the centre of the 14M (14.1 million pixels worth) of the MOS
sensor allowing you to take more magnified pictures.
Note
•
The Digital Zoom cannot be set when õ has been selected.
•
The indicated zoom magnification is an approximation.
•
"EZ" is an abbreviation of "Extra Optical Zoom".
•
The Optical Zoom is set to Wide (1k) when the camera is turned on.
Zoom position is as when the power was turned off if the [ZOOM RESUME]
[ON].
•
If you use the zoom function after focusing on the subject, focus on the subject again.
•
The lens barrel extends or retracts according to the zoom position. Take care not to interrupt
the motion of the lens barrel while the zoom lever is rotated.
•
When you rotate the zoom lever, you may hear some sound from the camera or the camera
may shake. This is not a malfunction.
•
When using the Digital Zoom, [STABILIZER] may not be effective.
•
When using the Digital Zoom, we recommend using a tripod and the Self-Timer
pictures.
•
[I.RESOLUTION] is fixed to [i.ZOOM] in Intelligent Auto Mode (when [MOTION DEBLUR] is set
to [OFF]) or Scene Mode
¢ [i.ZOOM] cannot be used when in [HIGH SENS.] or [FLASH BURST] in Scene Mode.
•
The Extra Optical Zoom cannot be used in the following cases.
–
[MOTION DEBLUR] in Intelligent Auto Mode
–
In [HIGH SENS.], [FLASH BURST], [PHOTO FRAME] and [HIGH SPEED MOVIE] in Scene
Mode
–
[PIN HOLE] in My Colour Mode
–
When recording motion pictures
–
When [QUALITY] is set to [
•
[DIGITAL ZOOM] cannot be used in the following cases.
–
In [HIGH SENS.], [FLASH BURST], [PHOTO FRAME] and [HIGH SPEED MOVIE] in Scene
Mode
–
[PIN HOLE] or [FILM GRAIN] in My Colour Mode
–
When [QUALITY] is set to [
Basic
] (3 million pixels worth), it will take pictures with the 3M
¢
.
], [ ] or [
], [ ] or [
- 59 -
]
]
(P34) is set to
(P77) for taking