Panasonic DMCFZ100K Operating Instructions Manual page 32

[CUST. SET MEM.]
•
Refer to P116 for details.
[Fn BUTTON SET]
•
Refer to P132 for details about the [REC] Mode menu.
[LCD MODE]
LCD
•
The brightness of the pictures displayed on the LCD monitor is increased so some subjects
may appear differently from actuality on the LCD monitor. However, this does not affect the
recorded pictures.
•
The LCD monitor automatically returns to normal brightness after 30 seconds when recording
in Power LCD Mode. Press any button to make the LCD monitor bright again.
•
If the screen is difficult to see because of light from the sun etc. shining on it, use your hand or
another object to block the light.
•
The number of recordable pictures decreases in Auto Power LCD Mode and Power LCD Mode.
•
[AUTO POWER LCD] cannot be selected in Playback Mode.
[DISPLAY SIZE]
Preparation
Up to 3 current camera settings can be registered as custom
settings.
(Recording Mode only)
Assign [REC] Mode menu to 4 button. It is convenient to register
[REC] Mode menu that is used often.
(Recording Mode only)
[FILM MODE]/[ASPECT RATIO]/[QUALITY]/
[METERING MODE]/[WHITE BALANCE]/[I.EXPOSURE]/
[GUIDE LINE]/
[
These menu settings make it easier to see the LCD monitor when
you are in bright places.
[OFF]
„ [AUTO POWER LCD]:
The brightness is adjusted automatically depending on how bright
it is around the camera.
... [POWER LCD]:
The LCD monitor becomes brighter and easier to see even when
taking pictures outdoors.
Change the display size of some icons and menu screens.
[STANDARD]/[LARGE]
- 32 -
REC AREA]/[REMAINING DISP.]