Panasonic DMCFZ100K Operating Instructions Manual page 154

∫ About retrieval of Burst Picture group information
If you delete or change the file names of pictures stored in the
built-in memory using a PC, or pictures stored the memory card
using a PC or other device, the camera will automatically retrieve
the new information and recompose the burst picture groups when
you switch it on again. During the retrieval of information after a
change to the files, the currently retrieving information icon [
A will appear in the playback screen. While this icon is displayed,
you cannot use [DELETE] or the playback menu
¢2 With the exception of [CALENDAR]
(P175).
Note
•
Pictures for which information could not be retrieved will not be recognised as belonging to a
burst picture group, but as single pictures.
•
If you switch the power switch to [OFF] while information is being retrieved, the information
retrieved up to that point will be saved. When you switch on again, the information retrieval will
restart from the same point.
Advanced (Recording pictures)
2
¢
(P165) and [ROTATE DISP.]
- 154 -
]
A