Panasonic DMCFZ100K Operating Instructions Manual page 37

x [USB MODE]
•
When [PC] is selected, the camera is connected via the "USB Mass Storage" communication
system.
•
When [PictBridge(PTP)] is selected, the camera is connected via the "PTP (Picture Transfer
Protocol)" communication system.
| [VIDEO OUT]
•
This will operate when the AV cable or HDMI mini cable (optional) is connected.
[TV ASPECT]
•
This will work when the AV cable is connected.
Preparation
Select the USB communication system after or before connecting
the camera to your PC or your printer with the USB connection
cable (supplied).
y [SELECT ON CONNECTION]:
Select either [PC] or [PictBridge(PTP)] if you connected the
camera to a PC or a printer supporting PictBridge.
{ [PictBridge(PTP)]:
Set after or before connecting to a printer supporting PictBridge.
z [PC]:
Set after or before connecting to a PC.
Set to match the colour television system in each country.
(Playback Mode only)
[NTSC]: Video output is set to NTSC system.
[PAL]: Video output is set to PAL system.
Set to match the type of TV.
(Playback Mode only)
[W]: When connecting to a 16:9 screen TV.
[X]: When connecting to a 4:3 screen TV.
- 37 -