Panasonic DMCFZ100K Operating Instructions Manual page 17

Connect the charger to the electrical
outlet.
•
Disconnect the charger from the electrical socket
and detach the battery after charging is
completed.
•
The AC cable does not fit entirely into the AC
input terminal. A gap will remain as shown on the
right.
∫ About the [CHARGE] indicator
The [CHARGE]
indicator turns on:
The [CHARGE]
indicator turns off:
•
When the [CHARGE] indicator flashes
–
The battery temperature is too high or too low. It is recommended to charge the battery again
in an ambient temperature of between 10 ºC to 30 ºC.
–
The terminals of the charger or the battery are dirty. In this case, wipe them with a dry cloth.
Preparation
The [CHARGE] indicator
The [CHARGE] indicator
charging has completed without any problem.
- 17 -
plug-in type
90°
inlet type
is turned on and charging will start.
A
of the charger will turn off once the
A