Backing Up, Restoring, And Recovering (Ubuntu Linux); Performing A System Recovery; Creating The Restore Dvds; Creating A Restore Image On A Usb Device - HP Pavilion g6-2200 Maintenance And Service Manual

9 Backing up, restoring, and
recovering (Ubuntu Linux)
Recovery after a system failure is as good as your most recent backup. As you add new software and
data files, you should continue to back up your system on a regular basis to maintain a reasonably
current backup.

Performing a system recovery

The Deja Dup Restore Tool allows you to repair or restore the computer to its original factory state. You
can create an image restore DVD using a DVD±RW optical drive. You can also create a restore image
on a USB storage device.
CAUTION:
files you have created and any software installed on the computer are permanently removed. The
recovery tool reinstalls the original operating system and programs and drivers that were installed at
the factory. Software, drivers, and updates not installed at the factory must be manually reinstalled.
Personal files must be restored from a backup.
NOTE:
HP recommends that you create the image restore in the event of a system failure.

Creating the restore DVDs

The restore creation software creates a set of system restore discs using blank, writable DVDs (DVD-R or
DVD+R). HP recommends using blank DVD+R discs from a manufacturer you trust, because these
recovery DVDs are so important. You need approximately 3 blank DVD+R discs. The program states
how many discs are needed at the beginning of the process.
To create restore DVDs:
1. Click the System menu icon at the far right of the top panel, and then click System Settings
> Backup.
2. Select Storage from the panel on the left side of the window, click the down-arrow next to
Backup Location, and select the DVD from the drop-down list.
3. Select Overview from the panel on the left side of the window, and then click Back Up Now.
4. Follow the on-screen instructions.

Creating a restore image on a USB device

NOTE:
Be sure AC power is connected to the computer you begin.
Verify the exact amount of free space on your storage device before you begin the creation process.
For most models, you will need at least 8 GB of free space on the storage device. However, depending
106 Chapter 9 Backing up, restoring, and recovering (Ubuntu Linux)
Using Restore completely erases hard drive contents and reformats the hard drive. All
ENWW