Operating And Cleaning Your; Ceiling Fan - Hunter 28672 Owners And Installation Manual

8 • Operating and Cleaning Your Ceiling Fan
8-1 . Turn on electrical power to the fan .
8-2 . The fan pull chain controls power to the fan . The pull chain has
five settings in sequence: High, Medium, Low, Serenity Speed, and
Off .
• Pull the chain slowly to change settings .
• Release slowly to prevent the chain from recoiling into the
blades .
• The chain uses a breakaway connector that separates if the
chain is jerked . If this happens, simply reinsert the chain into
the connector .
8-3 . The light pull chain controls the power to the light fixture . The
chain has two settings: ON and OFF .
Ceiling fans work best by blowing air downward (counterclockwise
8-4 .
blade rotation) in warm weather to cool the room with a direct
breeze . In winter, having the fan draw air upward (clockwise blade
rotation) will distribute the warmer air trapped at the ceiling
around the room without causing a draft .
8-5 . For cleaning finishes, use a soft brush or lint-free cloth to prevent
scratching . A vacuum cleaner brush nozzle can remove heavier
dust . Remove surface smudges or accumulated dirt and dust using
a mild detergent and a slightly dampened cloth . You may use
an artistic agent, but never abrasive cleaning agents as they will
damage the finish .
8-6 . The blades on this fan have been treated with Hunter's Dust
Armor protection, making the blades less likely to attract dust
and dirt . Use a dry or slightly damp lint free cloth to clean the
blades . Do not use a
furniture polish or any
other cleaners that leave
any residue, as they will
damage the protective
Dust Armor on the blades .
To Change Airflow Direction
Turn the fan off and let it come to a complete
stop . Slide the reversing switch on the fan to the
opposite position . Restart fan .
15
45068-01 • 05/19/10 • Hunter Fan Company
In warm weather, use
downward air flow pattern
In cold weather, use upward
air flow pattern
Reversing
Switch