Using The Remote Control; Installing Remote Control Batteries; Aiming The Remote Control; Turning On Your Tv For The First Time - Dynex DX-32L221A12 User Manual

Using the remote control

Using the remote control

Installing remote control batteries

To install the remote control batteries:
1 Remove the battery cover.
2 Insert two AAA batteries into the battery compartment. Make
sure that you match the + and – symbols on the batteries with
the + and – symbols in the battery compartment.
3 Replace the battery cover.
Cautions
• Batteries should not be exposed to excessive
heat, such as sunshine, heat registers, or fire.
• Battery chemicals can cause a rash. If the
batteries leak, clean the battery compartment
with a cloth. If chemicals touch your skin, wash
immediately.
• Make sure that batteries are disposed of
correctly. Do not burn or incinerate.

Aiming the remote control

To aim the remote control:
• Point the remote control towards the remote sensor on the
front of your TV.
DX-32L221A12/DX-40L260A12
Turning on your TV for the first
time
The first time you turn on your TV, the Setup Wizard opens. The Setup
Wizard guides you through setting up basic settings including the menu
language, time setting, picture mode, TV signal source, and the channel
list.
To set up your TV:
1 Make sure that you have:
• Installed the remote control batteries. (See page 17 for
details).
• Connected an antenna, cable TV, or satellite TV. (See page 8
or 11 for details.)
• Connected the power cord. (See page 8 for details.)
2 Press (power) to turn on your TV. The Choose Your Menu
Language screen opens.
Choose Your Menu Language
Move Select
Set menu language to English, Français or Español
3 Press or to highlight the language you want, then press
ENTER. The Choose Your Time Setting screen opens.
Choose Your Time Setting
Mode
Time Zone
Daylight Savings
Year
Month
Day
Time
Move Select
If Automatic, options are automatically set by TV source
4 Press or to highlight Mode, then press or to select
Manual (to set the date and time manually) or Auto (to set the
date and time automatically from a TV signal source based on the
time zone your select).
5 Press or to highlight Time Zone, then press or to
select your time zone. You can select Pacific, Alaska, Hawaii,
Newfoundland, Atlantic, Eastern, Central, or Mountain.
6 Press or to highlight Daylight Savings, then press or
to select On (if your viewing area observes Daylight Savings
Time) or Off (if your viewing area does not observe Daylight
Savings Time).
7 If you selected Manual for Mode, set the date by pressing or
to highlight Time Zone, Daylight Savings, Year, Month, or
Day, then press or to adjust the setting.
8 If you selected Manual for Mode, set the time by pressing or
to highlight Time, then pressing or to select the hour,
minute, or AM/PM field. Press or to adjust the setting.
Setup Wizard
English
Français
Español
Back
Menu
Setup Wizard
Auto
Pacific
Off
2000
Jan
13
12 : 07 AM
Back
Menu
17