Dynex DX-32L221A12 User Manual page 14

10
DX-32L221A12/DX-40L260A12
Using composite video (good)
To connect a cable or satellite box using composite video:
1 Turn off your TV and all connected equipment.
2 Connect the incoming cable from the cable wall jack to the
cable-in jack on the cable box.
3 Connect a composite cable ( included) to the Y/VIDEO, L, and R
jacks on the side of your TV and to the composite video and audio
out jacks on the cable or satellite box.
The audio cables are color coded
(white and red) to the L and R audio
jacks.
The video cable (yellow) shares a
jack. with the component Y cable
and goes to the green jack.
Side of TV
4 Turn on your TV, then turn on the cable or satellite box.
5 Go through the setup wizard on page 18.
Cable or satellite box
A/V cable
Using coaxial (good)
To connect a cable or satellite box using coaxial:
1 Turn off your TV and all connected equipment.
2 Connect the incoming cable from the cable wall jack to the
cable-in jack on the cable or satellite box.
3 Connect a coaxial cable (not included) to the ANT/CABLE IN jack
on the back of your TV and to the coaxial out jack on the cable or
satellite box.
Back of TV
4 Turn on your TV, then turn on the cable or satellite box.
5 Go through the setup wizard on page 18.
Notes
• Use a coaxial cable to eliminate interference and
noise from radio waves.
• Do not bundle the coaxial cable with the power
cord or other cables.
Making connections
Cable or satellite box
Coaxial cable