Dynex DX-32L221A12 User Manual page 13

Making connections
Using DVI (same as HDMI but requires an audio connection)
Note
A DVI device must be connected to the HDMI 1 jack.
If you connect a DVI device to the HDMI 2 jack, you
will not hear audio.
To connect a cable or satellite box using DVI:
1 Turn off your TV and all connected equipment.
2 Connect the incoming cable from the cable wall jack to the
cable-in jack on the cable box.
3 Connect an HDMI-DVI adapter (not included) to one end of an
HDMI cable (not included).
4 Connect the HDMI-DVI adapter to the HDMI 1 jack on the back of
your TV and to the DVI OUT jack on the cable or satellite box.
Cable or satellite box
Back of TV
5 Connect a 3.5 mm audio cable (not included) to the PC/DVI
AUDIO IN jack on the back of your TV and to the AUDIO OUT jack
on the cable or satellite box.
Note
When you connect the audio using the PC/DVI
AUDIO IN jack, the audio output is analog.
6 Turn on your TV, then turn on the cable or satellite box.
7 Go through the setup wizard on page 18.
DX-32L221A12/DX-40L260A12
Using component video (better)
To connect a cable or satellite box using component video:
1 Turn off your TV and all connected equipment.
2 Connect the incoming cable from the cable wall jack to the
cable-in jack on the cable box.
3 Connect a component video cable (not included) to the Y, P
P jacks on the side of your TV and the component video out
R
jacks on the cable or satellite box.
Side of TV
4 Connect an audio cable (not included) to the L and R audio jacks
on the side of your TV and to the audio out jack on the cable or
satellite TV box.
Note
When you connect the audio using the L and R audio
jacks, the audio output is analog.
Your TV has a digital audio jack, so you can connect
the video to the component video jacks and connect
the audio to the digital audio jack to get digital audio
output.
5 Turn on your TV, then turn on the cable or satellite box.
6 Go through the setup wizard on page 18.
B
Cable or satellite box
Audio cable
Component video cable
9
, and