Remote Control - Dynex DX-32L221A12 User Manual

6
DX-32L221A12/DX-40L260A12
# Item Description
Connect an antenna or cable TV to this jack.
9 ANT/CABLE For more information, see "Connecting an
antenna or cable TV (no box)" on page 11.
Connect an audio amplifier to this jack. For
10 DIGITAL OUTPUT more information, see "Using digital audio"
on page 15.
Connect an external sound system to this
11 AUDIO OUT jack. For more information, see "Using
analog audio" on page 16.

Remote control

# Button Description
Press to open the Input Source list, then press
or to cycle through the available input
1 INPUT
sources. For more information, see "Selecting the
video input source" on page 18.
Press to enter channel numbers and the parental
2 Numbers
control password.
Press to enter a digital sub-channel number. For
3 more information, see "Selecting a channel" on
page 19.
# Button Description
Press to display TV status information, such as
the channel number, channel name (if available),
4 INFO
or signal source. For more information, see
"Viewing channel information" on page 20.
5 ENTER Press to confirm selections or changes.
6 MENU Press to open the on-screen menu.
7
VOL +/VOL – Press to increase or decrease the volume.
Press to mute the sound. Press again to restore
8 MUTE
the sound.
Press to select the aspect ratio. For more
9 ZOOM information, see "Adjusting the TV picture" on
page 20.
Press to select the video modes. You can select
Vivid, Standard, Energy Savings, or Custom.
10 PICTURE
For more information, see "Adjusting the TV
picture" on page 20.
Press to set the sleep timer. You can select Off, 5,
10, 15, 30, 60, 90, 120, 180, or 240 minutes. For
11 SLEEP
more information, see "Setting the sleep timer"
on page 30.
Press to select the sound settings. For more
12 AUDIO information, see "Adjusting sound settings" on
page 21.
Press to turn your TV on or off (Standby mode).
When your TV is off, power still flows into it. To
(power)
13
disconnect power, unplug the power cord.
In TV mode, press to return to the previous
14 RECALL
channel.
Press to display the program guide. For more
15 GUIDE information, see "Viewing channel information"
on page 20.
Press to move up, down, left, or right in
16
on-screen menus.
17 EXIT Press to close the on-screen menu.
Press to change TV channels to the next higher
18 CH +/CH– or next lower channel. For more information, see
"Selecting a channel" on page 19.
Press to open the Favorite Channel list. For more
information, see "Setting up a favorite channel
19
FAVORITE
list" on page 23 and "Viewing a favorite channel"
on page 24.
VIDEO—Press to select the device connected to
the AV IN jacks.
HDMI—Press one or more times to select the
device connected to the HDMI 1 or HDMI 2 jack.
20 Video input TV—Press to select the TV input source.
COMP—Press to select the device connected to
the COMPONENT video jacks.
VGA—Press to select the device connected to
the PC IN VGA jack.
21
CH-LIST Press to open the channel list.
Press to turn closed captioning on or off. You can
select CC Off, CC On, or CC On When Mute. For
22 CCD
more information, see "Turning closed
captioning on or off" on page 28.
Press to select the audio mode for an analog
program. You can select:
• Mono—Select this option if there is noise or static on weak
23 MTS/SAP
stereo broadcasts.
• Stereo—Select this option for programs broadcast in stereo.
• SAP—Select this option to listen to a secondary audio
program, if available.
TV components