Warning Message - Kyocera FS-C8500DN Operation Manual

Encryption Code: a b
••••••••S
*abcdefghijklmnopqrst
uvwxyzABCDEFGHIJKLMNO
[Bckspace] [ Enter
Task is completed.
turn the main power
switch off and on.
9

Warning Message

If the encryption code information of the printer has been lost for some
reason, the screen shown here appears when the power is turned on.
1
Enter the encryption code that was entered during installation of the
security kit. Press
[OK] to enter the password.
]
You can go back one character by pressing [Bckspace] ([Left
Select]).
CAUTION Even though entering a different encryption code can
also enable continuation of a job, this will overwrite all the data
stored in the hard disk. Exercise extreme caution when entering
an encryption code.
The encryption code is not the same as the security password.
2
Press [Enter] ([Right Select]). Processing starts.
3
When the Task is completed. screen appears, turn the power
switch off and then on.
, , or to select characters, and then press