Kyocera FS-C8500DN Operation Manual page 7

Data Security:
1 Data Overwrite
2
Security Passwd
3
Initialization
[ Exit
New Password:
•••••
*abcdefghijklmnopqrst
uvwxyzABCDEFGHIJKLMNO
[Bckspace] [ Enter
Confirm Password: a b
•••••
*abcdefghijklmnopqrst
uvwxyzABCDEFGHIJKLMNO
[Bckspace] [ Enter
11
Press [Enter] ([Right Select]). If the entered security password is
a b
correct, the Data Security menu screen appears. If the entered
security password is incorrect, the Password screen reappears.
(You are returned to step 9.)
]
Changing Security Password
You can customize the security password so that only the administrator
can use the security kit.
1
In the Data Security menu, press
Passwd.
2
Press [OK]. The New Password screen appears.
a b
S
]
3
Enter a new security password. Press
characters, and then press [OK] to enter the password.
You can go back one character by pressing [Bckspace] ([Left
Select]).
The security password must be 6 to 16 alphanumeric characters.
CAUTION Avoid any easy-to-guess numbers for the security
password (e.g. 11111111 or 12345678).
4
Press [Enter] ([Right Select]). The Confirm Password screen
appears.
S
]
5
For confirmation, enter the new security password once again. Press
, ,
password.
You can go back one character by pressing [Bckspace] ([Left
Select]).
or to select characters, and then press [OK] to enter the
or to select Security
, , or to select
6