Error Messages; Printer Panel Message; Memory Card - Kyocera FS-5800C User Manual

Error Messages

Add paper
Battery error
Call service
person##:#######
Cassette 1
not loaded
Cassette 2
not loaded
Cassette 3
not loaded
Format error
Front/Right
cover Open
HARDDISK error##
Press CONTINUE
1
The total printed pages is not shown when the error code is F0 (Communication error).

Printer Panel Message

Error Message
<paper source>

MEMORY CARD

<Media>
Care and Maintenance
Possible Cause
The paper source is out of
paper.
The memory card's
battery is run out or not
installed.
A failure requiring the
attention of service
personnel has occurred.
The printer's media
cassette is not loaded in
the printer, or not closed
fully in position.
The paper feeder's top
media cassette is not
loaded in the paper
feeder, or not closed fully
in posision.
The paper feeder's bottom
media cassette is not
loaded in the paper
feeder, or not closed fully
in posision.
The hard disk or memory
card is not formatted.
The front or right side
cover is open.
The printer has encoun-
tered an error during
access to the option
harddisk.
Corrective Action
Add paper to the paper cas-
sette (Cassette 1), option paper
feeder's cassettes (Cassette 2
and 3), or multi-purpose tray
(MP Tray).
Insert a new battery in the
memory card. (See the memory
card manufacturer's instruc-
tion.)
Note the corresponding error
code (## followed by the colon)
and the total printed pages
(####### preceded by the
colon). Turn printer power off
and call for service.
Insert the media tray, or close it
securely. (Cassette1 is shown
as Cassette when no option
paper feeder is installed.)
Insert the top media tray, or
close it securely. (This mes-
sage is shown only when the
printer is installed with an
option paper feeder.)
Insert the bottom media tray,
or close it securely. (This
message is shown only when
the printer is installed with an
option paper feeder.)
Format the media (For a
memory card, P. 54).
Check both covers and close
them tightly.
Note the error code (##)
preceded by the HARDDISK
error message. Then, press
CONTINUE to clear the error
situation. Refer to section
Harddisk Error Codes
( P. 99).
1
95