Presentation Timer (Exit) Command; Keystone ↑ Command - Sanyo PLC-HP7000L Specifications

PLC-HP7000L Basic Serial Command Functional Specifications

6.58 PRESENTATION TIMER (Exit) Command

Command "C8B" [CR]
Exit P-Timer function.
Detail This command works the same way as pressing and hold "P-TIMER" button of the
remote control.
Acceptable
Response
Unacceptable
6.59 KEYSTONE ↑ Command
Command "C8E" [CR]
Correct keystone distortion by reducing upper part of image. This command
Detail invokes both operations of keystone distortion correction and OSD display,
regardless of whether the "KEYSTONE" OSD has been already displayed or not.
Acceptable
Response
Unacceptable
6.60 KEYSTONE ↓ Command
Command "C8F" [CR]
Correct keystone distortion by reducing lower part of image.
Detail invokes both operations of keystone distortion correction and OSD display,
regardless of whether the "KEYSTONE" OSD has been already displayed or not.
Acceptable
Response
Unacceptable
6.61 KEYSTONE → Command
Command "C90" [CR]
Correct keystone distortion by reducing right side of image.
Detail invokes both operations of keystone distortion correction and OSD display,
regardless of whether the "KEYSTONE" OSD has been already displayed or not.
Acceptable
Response
Unacceptable
6.62 KEYSTONE ← Command
Command "C91" [CR]
Correct keystone distortion by reducing left side of image.
Detail invokes both operations of keystone distortion correction and OSD display,
regardless of whether the "KEYSTONE" OSD has been already displayed or not.
Acceptable
Response
Unacceptable
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
21/27
This command
This command
This command