Focus - Command; Input 1 Hdmi Command; Input 1 Analog Rgb Command; Input 1 Scart Command - Sanyo PLC-HP7000L Specifications

PLC-HP7000L Basic Serial Command Functional Specifications

6.46 FOCUS - Command

Command "C4A" [CR]
Adjust on-screen focus by making focal length shorter. (The lens moves forward
Detail
This command works the same way as "FOCUS ▼" button of the remote control.
Acceptable
Response
Unacceptable

6.47 INPUT 1 HDMI Command

Command "C4F" [CR]
Select HDMI input in Input 1.
Detail Although projector returns "OK", Input search is not executed with this command
while Input button is set to Mode2 or Mode3.
Acceptable
Response
Unacceptable

6.48 INPUT 1 ANALOG RGB Command

Command "C50" [CR]
Select Analog RGB input in Input 1.
Detail Although projector returns "OK", Input search is not executed with this command
while Input button is set to Mode2 or Mode3.
Acceptable
Response
Unacceptable

6.49 INPUT 1 SCART Command

Command "C51" [CR]
Select SCART input in Input 1.
Detail Although projector returns "OK", Input search is not executed with this command
while Input button is set to Mode2 or Mode3.
Acceptable
Response
Unacceptable

6.50 INPUT 1 DVI (PC DIGITAL) Command

Command "C52" [CR]
Select DVI (PC Digital) input in Input 1.
Detail Although projector returns "OK", Input search is not executed with this command
while Input button is set to Mode2 or Mode3.
Acceptable
Response
Unacceptable

6.51 INPUT 1 DVI (AV HDCP) Command

Command "C53" [CR]
Select DVI (AV HDCP) input of Input 1.
Detail Although projector returns "OK", Input search is not executed with this command
while Input button is set to Mode2 or Mode3.
Response Acceptable
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
19/27
)