Power On Command; Power Off Command (Quick Power Off); Power Off Command; Input 1 Command - Sanyo PLC-HP7000L Specifications

PLC-HP7000L Basic Serial Command Functional Specifications

6.5 POWER ON Command

Command "C00" [CR]
Power ON
Detail When already Power is ON, no operation is started.
command during Countdown in process, Countdown is terminated.
Acceptable
Response
Unacceptable

6.6 POWER OFF Command (Quick POWER OFF)

Command "C01" [CR]
Power OFF (Standby)
This command executes Quick Power OFF operation without displaying "Power
Detail
OFF?" message, which is displayed when Power is turned OFF with
ON/STAND-BY button of the projector or remote control.
Acceptable
Response
Unacceptable

6.7 POWER OFF Command

Command "C02" [CR]
Power OFF (Standby)
This command works the same way as when Power is OFF with ON/STAND-BY
button of the projector and remote control.
(When the command is sent once, "Power OFF?" message is displayed. If this
Detail
command is sent again while "Power OFF?" message is displayed, Power OFF
operation is executed.)
When sending this command during Countdown in process, Countdown is
terminated.
Acceptable
Response
Unacceptable

6.8 INPUT 1 Command

Command "C05" [CR]
Select Input 1. This command works differently from the command by "Input 1"
key of the remote control.
Detail
command does not execute the source switching; just for switching to Input 1.
Although projector returns "OK", Input search is not executed with this command
while Input button is set to Mode2 or Mode3.
Acceptable
Response
Unacceptable

6.9 INPUT 2 Command

Command "C06" [CR]
Select Input 2. This command works differently from the command by "Input 2"
key of the remote control. When Input 2 has been selected, this command does
Detail not execute the source switching; just for switching to Input 2.
Although projector returns "OK", Input search is not executed with this command
while Input button is set to Mode2 or Mode3.
Acceptable
Response
Unacceptable
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
When Input 1 has been already selected, this
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
12/27
When sending this