Presentation Timer Command; Presentation Timer (Exit) Command; Keystone ↑ Command - Sanyo PLC-WM4500/L - 4500 Lumens Manual

PLC-WM4500/WM4500L Basic Serial Command Functional Specifications

6.57 PRESENTATION TIMER Command

Command "C8A" [CR]
Start Timer for presentation
Detail
This command works the same way as "P-TIMER" button of the remote control.
Acceptable
Response
Unacceptable

6.58 PRESENTATION TIMER (Exit) Command

Command "C8B" [CR]
Exit P-Timer function.
Detail This command works the same way as pressing and hold "P-TIMER" button of the
remote control.
Acceptable
Response
Unacceptable
6.59 KEYSTONE ↑ Command
Command "C8E" [CR]
Correct keystone distortion by reducing upper part of image. This command
Detail
invokes both operations of keystone distortion correction and OSD display,
regardless of whether the "KEYSTONE" OSD has been already displayed or not.
Acceptable
Response
Unacceptable
6.60 KEYSTONE ↓ Command
Command "C8F" [CR]
Correct keystone distortion by reducing lower part of image.
Detail invokes both operations of keystone distortion correction and OSD display,
regardless of whether the "KEYSTONE" OSD has been already displayed or not.
Acceptable
Response
Unacceptable
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
20/26
This command