Power On Command; Power Off Command Ÿ Quick Power Offÿ; Power Off Command; Computer 1 Command - Sanyo PLC-XC50 - 2600 Lumens Manual

PLC-XC50/55 Basic Serial Command Specifications

6.5. POWER ON Command

Command "C00" [CR]
Power ON
When already Power is ON, nothing is done.
Detail
When sending this command during processing Countdown, Countdown is
terminated.
Acceptable
Response
Unacceptable
6.6. POWER OFF Command ÿ Quick Power OFFÿ
Command "C01" [CR]
Power OFF (Standby)
When Power is OFF with ON/STAND-BY button of the projector and remote
Detail
control, "Power OFF?" is displayed. However, as soon as this command is sent,
Quick Power OFF is executed.
Acceptable
Response
Unacceptable

6.7. POWER OFF Command

Command "C02" [CR]
Power OFF (Standby).
The command operates the same Power OFF function as ON/STAND-BY button
of the projector and remote control.
Detail
Once this command is sent, "Power OFF?" is displayed. If this command is sent
again while it is displayed, Power OFF is executed.
When sending this command during Countdown, Countdown is terminated.
Acceptable
Response
Unacceptable

6.8. Computer 1 Command

Command "C05" [CR]
Select Computer 1 Input.
Detail Although Input search mode is On1/On2, the operation does not start with this
command.
Acceptable
Response
Unacceptable

6.9. Computer 2 Command

Command "C06" [CR]
Select Computer2 Input
Detail Although Input search mode is On1/On2, the operation does not start with this
command.
Acceptable
Response
Unacceptable
[ACK] [CR]
ÿ [CR]
[ACK] [CR]
ÿ [CR]
[ACK] [CR]
ÿ [CR]
[ACK] [CR]
ÿ [CR]
[ACK] [CR]
ÿ [CR]
11/25