Selecting Input Signal; To Select Input Signal [Input Signal]; Resumption Of Default Setting; To Reset Color Adjustment [Reset] - Eizo FlexScan SX3031W User Manual

2-11 Selecting Input Signal

●

To select input signal [Input Signal]

This function allows you to select the signal displayed on the monitor.
(1) Choose <Other> from the Adjustment menu, and press
(2) Select <Input Signal> with
<Input Signal> menu appears.
(3) Select <Auto/Manual> with

2-12 Resumption of Default Setting

●

To reset color adjustment [Reset]

The hue in the color mode currently set will revert to the default settings (factory
settings).
(1) Choose <Color> from the Adjustment menu, and press
(2) Choose <Reset> from the <Color> menu and press
The <Reset> menu appears.
(3) Select <Reset> with
The reset operation is completed.
●

To reset all settings [Reset]

Reset all adjustments/settings to the factory default settings.
(1) Choose <Others> from the Adjustment menu, and press
(2) Choose <Reset> from the <Others> menu, and press
The <Reset> menu appears.
(3) Select <Reset> with
The reset operation is completed.
and , and press
or , and press
or , and press .
or , and press .
.
. NOTE
• When no input signal is received on
.
NOTE
• For default settings, refer to "Main
.
.
.
.
Chapter 2 Settings and Adjustments
both SIGNAL1 and SIGNAL2 port,
the signal port selecting function is
performed at every two seconds.
default settings (factory settings)" on
page 25.
19